-- *****************************************************************
-- CISCO-BERT-CAPABILITY
--
-- AGENT-CAPABILITIES mib for CISCO-BERT-MIB for CISCO Products
--
-- December 2003, Yizhong Shen
--
-- Copyright(c) 2002-2004 by Cisco Systems,Inc.
--
-- *****************************************************************
CISCO-BERT-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, Integer32
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;
ciscoBertCapability MODULE-IDENTITY
LAST-UPDATED "200408070000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The Agent Capabilities for CISCO-BERT-MIB for
Cisco Products Series.
- ciscoBertAxsmeCapabilityV3R00 is for
Enhanced ATM Switch Service Module(AXSM-E), and
Enhanced Processor Switch Module 1(PXM1E) uplink."
REVISION "200408070000Z"
DESCRIPTION
"Modify ciscoBertCapabilityV5R015 for VXSM release 5.0.15."
REVISION "200312220000Z"
DESCRIPTION
"Modify ciscoBertCapabilityV5R00 for VXSM release 5.0.0."
REVISION "200309190000Z"
DESCRIPTION
"Added ciscoBertCapabilityV5R00 for VXSM release 5.0.0."
REVISION "200210300000Z"
DESCRIPTION
"Added cbRowStatus support description."
REVISION "200206110000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 274 }
ciscoBertAxsmeCapabilityV3R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 3.0"
STATUS current
DESCRIPTION "CISCO-BERT-MIB Capabilities."
SUPPORTS CISCO-BERT-MIB
INCLUDES { ciscoBertConfigGroup, ciscoBertStatsGroup }
VARIATION cbTestPattern
DESCRIPTION "Supported with limitation.
The agent supports following enums:
allZeros(1),
allOnes(2),
altOneZero(3),
doubleAltOnesZeros(4),
oneIn4(5),
oneIn8(6),
oneIn16(7),
threeIn24(8),
inbandLoopBackActivate(9),
inbandLoopBackDeactivate(10),
twoE3MinusOne(11),
twoE4MinusOne(12),
twoE5MinusOne(13),
twoE6MinusOne(14),
twoE7MinusOne(15),
twoE7MinusOneFT1Loopup(16),
twoE9MinusOne(18),
twoE10MinusOne(19),
twoE11MinusOne(20),
twoE15MinusOne(21),
twoE17MinusOne(22),
twoE18MinusOne(23),
twoE20MinusOne(24),
twoE20MinusOneQRSS(25),
twoE21MinusOne(26),
twoE22MinusOne(27),
twoE23MinusOne(28),
twoE25MinusOne(29),
twoE28MinusOne(30),
twoE29MinusOne(31),
twoE31MinusOne(32)
The agent does not support
twoE7MinusOneFT1Loopdown(17),
dds1pattern (33),
dds2pattern (34),
dds3pattern (35),
dds4pattern (36),
dds5pattern (37),
userPattern(38)."
VARIATION cbUserPattern
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbLoopback
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbLoopbackCode
SYNTAX INTEGER {lineLoopbackESF(13)}
DESCRIPTION "Supported with limitation.
lineLoopbackESF(13) only."
VARIATION cbErrorInsertionRate
SYNTAX INTEGER {
noError(1),
oneInHundred(3),
oneInThousand(4),
oneInTenThousand(5),
oneInHundredThousand(6),
oneInMillion(7),
oneInTenMillion(8)
}
DESCRIPTION "The agent does not support oneInTen(2)."
VARIATION cbDuration
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbRowStatus
DESCRIPTION "The agent statically maintains a cbTable
with all entries corresponding to the T1
lines at the card startup. These entries can
not be created or deleted. However, a set
to 'destroy(6)' will stop the bert test."
VARIATION cbDS0DPCodeIteration
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbTxBitCountLower
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbTxBitCountUpper
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbHCTxBitCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbHCRxBitCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbHCRxBitErrCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbSyncLossCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbPatternLossCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbFrameLossCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbESsCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbSESsCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
VARIATION cbEFSsCounts
ACCESS not-implemented
DESCRIPTION "Not Supported."
::= { ciscoBertCapability 1 }
ciscoBertCapabilityV5R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 5.0"
STATUS current
DESCRIPTION "CISCO-BERT-MIB capabilities for Voice Switch
Service Module (VXSM) Release 5.0.0"
SUPPORTS CISCO-BERT-MIB
INCLUDES { ciscoBertConfigGroup, ciscoBertStatsGroup }
VARIATION cbConfEntry
CREATION-REQUIRES
{
cbTestPattern
}
DESCRIPTION "The above object is required for row creation."
VARIATION cbUserPattern
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbBertTxPatternInv
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbBertRxPatternInv
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbSingleBitErrorInsert
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbFailedReason
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbStartDateAndTime
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbDS0DPCodeIteration
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbTestPattern
SYNTAX INTEGER { allZeros (1),
allOnes (2),
altOneZero (3),
doubleAltOnesZeros(4),
oneIn4 (5),
oneIn8 (6),
oneIn16 (7),
threeIn24 (8),
twoE9MinusOne (18),
twoE11MinusOne (20),
twoE15MinusOne (21),
twoE20MinusOne (24),
twoE20MinusOneQRSS(25),
twoE23MinusOne (28)
}
DESCRIPTION "Supported BERT test patterns."
VARIATION cbOperStatus
SYNTAX INTEGER { success (1),
inSync (2),
outOfSync (3),
bertFailed(6)
}
DESCRIPTION "Does not support values inLoopback(4) and
clockOutOfSync(5)"
VARIATION cbDuration
SYNTAX Integer32 (10..86400)
DESCRIPTION "Default value is 600"
VARIATION cbDs0BitMap
DESCRIPTION "The default value is { dsZero0, dsZero1, dsZero2,....,
dsZero22, dsZero23 } (0xFFFFFF00)"
VARIATION cbTxBitCountLower
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbTxBitCountUpper
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbSyncLossCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbPatternLossCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbFrameLossCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbESsCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbSESsCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbEFSsCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbErrorInjectCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoBertCapability 2 }
ciscoBertCapabilityV5R015 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 5.0.15"
STATUS current
DESCRIPTION "CISCO-BERT-MIB capabilities for Voice Switch
Service Module (VXSM) Release 5.0.15"
SUPPORTS CISCO-BERT-MIB
INCLUDES { ciscoBertConfigGroup,
ciscoBertStatsGroup,
ciscoBertConfigGroupDs1
}
VARIATION cbConfEntry
CREATION-REQUIRES
{
cbTestPattern
}
DESCRIPTION "The above object is required for row creation."
VARIATION cbUserPattern
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbBertTxPatternInv
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbBertRxPatternInv
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbSingleBitErrorInsert
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbFailedReason
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbStartDateAndTime
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbDS0DPCodeIteration
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbTestPattern
SYNTAX INTEGER { allZeros (1),
allOnes (2),
altOneZero (3),
doubleAltOnesZeros(4),
oneIn4 (5),
oneIn8 (6),
oneIn16 (7),
threeIn24 (8),
twoE9MinusOne (18),
twoE11MinusOne (20),
twoE15MinusOne (21),
twoE20MinusOne (24),
twoE20MinusOneQRSS(25),
twoE23MinusOne (28)
}
DESCRIPTION "Supported BERT test patterns."
VARIATION cbOperStatus
SYNTAX INTEGER { success (1),
inSync (2),
outOfSync (3),
bertFailed(6)
}
DESCRIPTION "Does not support values inLoopback(4) and
clockOutOfSync(5)"
VARIATION cbDuration
SYNTAX Integer32 (10..86400)
DESCRIPTION "Default value is 600"
VARIATION cbDs0BitMap
DESCRIPTION "The default value is { dsZero0, dsZero1, dsZero2,....,
dsZero22, dsZero23 } (0xFFFFFF00)"
VARIATION cbTxBitCountLower
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbTxBitCountUpper
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbSyncLossCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbPatternLossCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbFrameLossCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbESsCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbSESsCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbEFSsCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION cbErrorInjectCounts
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoBertCapability 3 }
END